Proposed German Kit built house was required by the planners at the Bath city council to be built so that the roof levels did not affect view from the property above.
On a steeply sloping site consisting of unstable slip clay an excavation in excess of 8.0m was required. In addition the active back face slopes significantly at nearly 20° increasing the active side pressure.
The site investigation also documented a series of historical slip circles extending to 5.0m, in conjunction with significant but sporadic water flow through the clay.
To compound the difficulty a series of TPO (tree protection orders) issued to the site and its steeply sloping terrain prevented the use of large construction equipment and during the project a retaining wall belonging to the neighbouring property collapsed due to wind loads.
Contiguous bored pile wall, anchored into the bedrock. Above this a 3m high in-situ reinforced concrete wall was built supported off ductile iron piles and two rows of 5.0m long soil nails.